NEC Display Solutions Europe - Airport Solutions  -

Additional Options


NEC’s strategy is that the display itself is the core element to any solution we produce. To build the solution that meets the customer’s application means customization is required, and so here at NEC we have produced a range of approved solutions that enable wider use of our core products. Each solution is tested and certified by NEC, ensuring that the display’s functionality and reliability is kept intact.

Silver Bezels

In order to ensure that NEC’s products aesthetically match existing legacy displays from other vendors, NEC offers silver bezels for the following FIDS displays:

NEC V323-2
NEC P Series products

For airports looking to put their brand on their FIDS displays, NEC’s bezels can be detached and re-coloured upon request.

Protective Screen Displays

In some areas of the airport where displays need to be placed below 2.3 m height, NEC offers a protective glass covering that is integrated and sealed inside the bezel of the display during manufacture. As with all NEC products we only provide the highest quality components and our protective glass is no different. NEC uses 4 mm thermally toughened Conturan glass from Schott, that is designed not only to protect the display from damage but also to enhance the clarity of image through the use of anti-reflective glass with dual-sided optical interference coatings between 50 to 100 nm thick to provide reduced reflection and resultantly high light transmission.

Video Wall Mounts

Building video walls with the wrong or inferior mounting brackets can result in a poor finish and add many man hours to the installation. NEC’s video wall mounts are tested in-house and approved for use with the NEC UN Series video wall modules. The video wall mounts have been proven to provide easy installation and adjustment to ensure near perfect alignment. The mounts also provide easy access for cabling, as well as front access for maintenance of the video wall. All these features will help to ensure the long life operation of our displays with little or no maintenance.


Video Wall Mount PD02VW 46 55 L


Video wall Mount PD02VW 46 55 L

Universal video wall mount for modular intallations of NEC MultiSync®46" XUN/V, 55" XUN/S and 40" to 55" XS and P Series large format displays. Landscape orientation.

  • Supports an unlimited number of displays
  • Connector kits eliminates guesswork and on-site calculations
  • Tool-less 8 point micro adjustment
  • Open wall plate architecture
  • Integrated cable management
  • Ready-to-install right out of the box

Video Wall Mount PD02VW MFS 46 55 L

Video Wall Mount PD02VW MFS 46 55 P

Video Wall Mount PD02VWXUN 46 P

Video Wall Mount PD03VWXUN 46 L

Video Wall Mount PDVWXUN 55 L

Video Wall Mount PDVWXUN 55 P

Video Wall Mount easyFrame02 X46UN

Video Wall Mount easyFrame X55UN

Video Wall Mount PDVW MFS 46 55 P

Video Wall Mount PDVW MFS 46 55 L

Video Wall Mount PD02VW QR 46 55 L

Video Wall Mount PD02VW QR 46 55 P

Video Wall Mount PDVW QR XL

Wall and Ceiling Mounts

NEC’s approved mounting systems for FIDS ensure that all NEC displays are correctly hung without risk to the passenger. Tested and approved by NEC, all mounting solutions provide easy installation and post-installation adjustment. Where multiple displays are to be banked, NEC’s mounts can be connected to ensure near perfect alignment. Available in portrait and landscape, and single and back to back orientation, NEC displays can be securely mounted vertically or up to 20 degrees variation.


Wall Mount PDW S 32-55 P


Wall Mount PDW S 32-55 P

Slim wall mount for large format displays from 32" to 55" with tilt function. Portrait orientation.

  • Super-slim design
  • Fits exactly into space between two wall studs
  • Locking padlock for improved personal safety and security from theft
  • Easy-to-use
  • Cost efficient
  • Screws for installing the display inlcuded
  • Supported VESA standards: 300 x 300; 400 x 200; 400 x 400





Wall Mount PDW S 32-55 L

Wall Mount PD03W T M P

Wall Mount PD02W T M L

Wall Mount PD02W T L L

Wall Mount PDW T XS

Wall-to-Floor Mount PD02WHA

Protective Housings

NEC produces a range of housings that can protect the displays from the environment and also protect the displays from the passenger whilst providing an aesthetically pleasing look and feel.

NEC tested and approved housings ensure that the operational temperature of the display is not at risk, to ensure the long operational life of the display.

With indoor housings available between 40” and 70” and a range of outdoor housings to suit both IP54 and IP66 ratings, where ever you need to deploy a NEC display system, a tested solution is available from NEC.


NEC Indoor Cabinet


Indoor Cabinet

Indoor cabinet designed for commercial premises, public spaces and locations on which the flow of visitors places high demands on media equipment. Compatible with NEC 40", 46" and 55" XS series large format displays. Portrait orientation only.

This enclosure is as secure as it is attractive for digital signage on walls, colums or suspended from indoor ceiling.

  • Unbreakable Hammerglass that can resist most forms of chemical and acid attack
  • Polycarbonate glass with 99,96 % UV protection
  • Special surface treatment prevents the glass from clouding or fading
  • Two drill-proof high-security locks prevent from external damage
  • Optional back cover gives protection from view and access when mounted on walls and columns
  • Simple installation, even when used for double-mounted displays
  • Ready-to-install right out of the box
  • Approved by NEC
Cabinets Order Code
Indoor Cabinet 40 white                                                              40000671
Indoor Cabinet 40 black 40000676
Indoor Cabinet 46 white 40000673
Indoor Cabinet 46 black 40000672
Indoor Cabinet 55 white 40000675
Indoor Cabinet 55 black


Optional Covers

Order Code

Cover 40 white 100013300
Cover 40 black 100013301
Cover 46 white 100013323
Cover 46 black 100013322
Cover 55 white 100013319
Cover 55 black 100013320

NEC Indoor Totem


Although NEC produces standard video and power cabling for all our public display products, sometimes customized cabling is required. Upon request NEC can provide both customized video and power cabling to meet the application needs.


This Website uses cookies. By continuing to use this site you consent to the use of cookies. More information