Projection Room
Enter Hollywood

NC1402L

Quietest projection performance for mid-sized screens

Built upon the latest Laser light source technology, the NC1402L digital cinema projector impresses audiences with crisp colours and premium quality imaging. At just 49dB in operation, the almost silent projector supports boothless cinema solutions.

Highly flexible, without the need for a special exhaust system, the projector is easy to install and suitable for ceiling, floor or mobile applications in mid-sized theatres with screen sizes of up to 14m wide.

With maintenance-free operation including protection against dust ingress and a low, eco-friendly power consumption, theatre operators benefit from a reduced overall total cost of ownership (TCO) and therefore achieve a greater per seat revenue.

Treat your movie-goers to next generation digital cinema projection for immersive, out-of-this-world motion picture experiences.

Specifications

Optical
Projection Method
3-chip DLP Cinema® Technology
Screen Size [m]
up to 14 in DCI colour (1.8 Gain screen)
Contrast Ratio
1600:1
Light Source
Laser Light Source, expected life: up to 50000 h 1
Lens
Zoom / Focus / Shift: Motorized
Other: Range of shift is dependent on lens
Primary Lenses: NP-9LS12ZM1: 1.2-1.72:1; NP-9LS13ZM1: 1.33-2.1:1; NP-9LS16ZM1: 1.62-2.7:1; NP-9LS20ZM1: 2.09-3.9:1; NP-9LS40ZM1: 4.07-6.34:1
DMD Specifications
2048 x 1080
Chip: 0.69" S2K, DLP Cinema® Technology
Cooling Method
Liquid: Air and liquid cooling inside
Connectivity Projector
External Controls
1 x GPIO (3D) (D-sub 15 pin female); 1 x GPIO (D-sub 37 pin female); 1 x RJ45 100Base-T
Electrical
Power Supply
Built-in power supply
Projector Power Supply Unit: 200 to 240V AC, 50/60Hz, single phase
Power Consumption [W]
1500 max.
Heat Dissipation (BTU)
5118
Environmental Conditions
Operating Temperature [°C]
10 to 35
Operating Humidity [%]
10 to 85 - non-condensing
Storage Temperature [°C]
-10 to 50
Storage Humidity [%]
10 to 85 - non-condensing
Regulations
Europe
EN55035; EN61000-3-2/-3-3 (Marking: TUV, CE); EN62368-1/EN55032 Class A
Laser / Lamp standard
EN60825-1 Ed3:2014 Class1; EN62471-5 Ed1:2015 Risk Group3; IEC60825-1 Ed3:2014 Class1; IEC62471-5 Ed1:2015 Risk Group3
Morocco
NM EN55024; NM EN60950-1; NM EN61000-3-2/-3-3 (Marking Morocco mark)
Other EMEA
EN55024; EN55032 Class A; EN55035; EN60950-1; EN61000-3-2/-3-3 (Marking CE)
Russia/Belarus/Kazakhstan
CISPR24; IEC60950-1/CISPR32 Class A; IEC61000-3-2/-3-3 (Marking: EAC)
United Arab Emitates
ECAS:IEC60950-1 (Marking: ECAS)
Mechanical
External Dimensions (W x H x D) [mm]
700 x 288 x 812 (without lens and protrusions)
Weight [kg]
69 (without lens)
Fan Noise [dB (A)]
< 48
Additional Features
Special Characteristics
Dust sealed optical engine; Full HFR 3D support; Laser Light System; Latest digital technology; Metal filter
Interfaces: Dolby IMS3000 (optional)
External Controls
2 x RJ45 (4 GPI and 6 GPO); 2 x RJ45 Gigabit Ethernet
Input Terminals
1 x USB Type 2.0; 2 x 3GSDI bidirectional (input and output); 2 x USB Type 3.0; eSATA; HDMI
Output Terminals
2 x RJ45 (16-channel AES3-EBU Digital Audio)
Additional Features
HFR 3D Support (48 Hz/eye, 60 Hz/eye); Integrated SMS; Integrated Storage: 2 TB (DCP, RAID5); NAS support
Manufacturer
Dolby (The Dolby IMS3000 is not a NEC product. NEC shall not in any way be liable for any product specifications).
Warranty
Warranty
2 years, parts warranty
Light Source
2 years or 7500h (whatever comes first)
Green Features
Ecological Materials
Laser technology reduces power usage and reduces replacement materials required
Datasheet for NC1402L

1 50% of initial brightness at the end of specified laser life time at 25 degree ambient temperature, under normal usage condition‚ not covered by standard warranty