Glossary

Auto Tiling Function

This feature will automatically setup all relevant Tile Matrix settings for an installation when multiple displays are daisy chained via DisplayPort and LAN and therefore save a tremendous amount of time during set-up because only one display needs to be adjusted instead of all displays in the video wall.

AutoBright

Automatically adjusts brightness of the picture to suit the screen content. At very bright screen contents, the intensity of the background lighting is automatically reduced.

Automatic Alarm E-mails

Almost all NEC Large Format Displays can automatically send an e-mail to a specified address in case a problem is detected. Trigger points can be fan error, critical temperature, power supply issues, no signal, etc. This feature helps detect and solve problems before the screen fails.

Automatic Black-Level Adjustment

Individual control of grey-level images for optimum representation. The black level is automatically adapted to the represented image and can be further adjusted manually.

Backlight Ageing Correction

This function is an additional feature to assure stable colour reproduction and luminance during the warm-up phase, as well as over the lifetime of the product.

BrilliantColor™

Technology developed by Texas Instruments for an improved representation of colours with greater accuracy of detail.

Browser Control via HTTP Server

The user can control the display through the browser in a LAN without needing any software or even use a tablet PC to make adjustments to the screen.

CableComp (Digital)

Excellent image quality without colour shifts – for cable lengths up to 100 metres with analogue and up to 30 metres with digital cables.

Carbon Footprint Meter

The Carbon Footprint Meter appears if ECO MODE is set to 1 or 2 and shows carbon footprint in % compared to the maximum brightness setting.

Carbon Savings Meter

The Carbon Savings Meter calculates and totals the CO ₂ savings that have been accrued by using the monitor/projector in Eco Mode. The Carbon Savings Meter displays the estimated carbon savings information in kg.

Digital Uniformity Control (ColorComp)

Creates the best uniformity of brightness and colour across the whole screen area.

Colour Management System

The unique Colour Management System from NEC enables the perfect colour balance and an outstanding representation of colours by means of an uncomplicated, yet precise adjustment of seven separate colours (red, green, blue, white, cyan, magenta and yellow). You can bring more vibrancy to your presentation with the help of the fine colour tuning. Six "colour modes" allow frequently used settings to be stored.

ControlSync ^®

Is a special EA Series cable for controlling up to 5 monitors from one ‘master’ monitor. All Eco and Menu tools as well as a number of other functions can be transferred from the master to the sub-monitors in just two simple steps. This feature reduces power consumption, for example through controlling brightness on all screens, and saves time by simultaneous turning on and off or applying preferred settings to all monitors.

Customize Setting

Is a particularly useful function for free-seating environments, where monitor users vary every day. This function will save IT administrators’ time by restoring the preferred monitor settings that a user might have changed.

DICOM (Part 14 Grayscale Display Function)

Based on the human contrast sensitivity (CS), this function makes it easier to see small relative changes in luminance in the bright areas of the image than in the dark areas. Some level of similarity in Grayscale perception or basic appearance for a given image between Display Systems of different Luminance is also assured. The Luminance difference that the average human observer can just perceive is known as a Just Noticeable Difference (JND). The JND Index is the input value to the GSDF, such that one step in JND Index results in a luminance difference that is a JND.

DICOM Simulation

Predefined gray scale allocation for an accuracte depiction of details in medical graphics (e.g. X-ray images). DICOM is a standard from the field of medicine and defines a standardised display function for gray scale images based on human sensitivity to contrast. Simulation means that the gray scale representation approximates the strict definition of the DICOM standard.

DIN V6868-57

For quality assurance in the field of radiology for medical diagnostic and review monitors in the German-speaking regions of Europe, in which the monitor is commissioned through a conformance check of brightness uniformity and successful calibration to the DICOM standard.

DisplayPort

The DisplayPort allows the simple Plug & Play transfer of image and audio signals from PCs and DVD players, etc. over a licence-free connection to the display. Use of Display Port allows a higher bandwidth so that higher resolutions can be achieved as well as visibly increased colour quality and up to 15 m cable lengths.

DLP

DLP ^® (Digital Light Processing)is a technology to project data and video images in the highest brilliance and sharpness. The path from the source of the signal to the screen stays completely digital.

DynamicBlack™

Feature to improve contrast behaviour by reducing the black value.

Eco Mode function

The "Eco Mode" energy-saving option enables the projector brightness to be lowered in order to prolong the service life of the lamp and to cut power consumption, providing the surrounding light conditions allow this. This mode is furthermore characterised by lower operating noise.

EcoModes

By gradually reducing the brightness, power consumption can be simply and quickly reduced even further at the touch of a button, which also brings about a reduction in heat emission.

EPEAT

EPEAT is a system to help purchasers evaluate, compare and select electronic products based on their environmental attributes. EPEAT is based on the IEEE 1680 family of standards for electronic product environmental assessment. Monitors that meet at least 23 required environmental performance criteria may be registered and rated as Gold, Silver or Bronze depending on the percentage of 28 optional criteria they meet above the baseline criteria.

ErgoDesign ^®

Individual comfort and ergonomic working position thanks to a heightadjustable stand and a display which can be tilted and swivelled.

Frame Comp

An integrated hardware circuit that supports a seamless display wall appearance to show fast moving content without any delays or breaks. This feature helps to stop the slight frame mismatch of individual displays within a wall to create one stunning image canvas over all screens by synchronizing the content.

GammaCompMD Administrator Suite

DICOM Calibration and quality assurance software
Standard for all NEC MD Series display systems and NEC MDview Series displays. Consists of the GammaCompMD Server software. Communication between Clients and Server is provided by SNMP Network Management Software. GammaCompMD Client software provides DICOM calibration and permanent quality assurance checks, ensuring consistent image quality on a PACS workstation. In a few steps, users or QA adminstrators can set NEC display systems in accordance with DICOM part 14. GammaCompMD Client supports several calibration instrument models, both attachable colorimeter types as the spot luminance meter types for calibration processes which include veil luminance measurement.

GB-R LED - The Perfect LED Backlight

Individual Green and Blue LEDs simply emit light and at the same time stimulate the Red phosphor spots. A relatively spectrally clean white light source is created. Many of these GB-R LED light sources are strung along the panel edge, with a light guide distributing the white light evenly across the screen. Heating and ageing effects as well as production costs are all brought under control.

The spectrally clean white light source works with special developed colour filters to ensure that more than 100% AdobeRGB colour space is visible.

Geometric Correction

Innovative function that enables hasslefree projection on curved, round or uneven surfaces, e.g. on columns, posts or onto corners.

HDCP compatible

HDCP is a system for encrypting audio and video data via the DVI and HDMI interfaces. HDCP compatiblity ensures that even encryted content can be displayed.

HDMI

The integrated High Definition Multimedia Interface (HDMI) supports standard, enhanced or high-definition video.

NEC’s ‚High Bright‘ Mode

Projectors have traditionally been supplied by default with the lamp set to maximum brightness, which was usually marked as 'normal mode'. However, the average lamp brightness in new projectors has steadily increased over time, and we have reached a point where using the preset maximum brightness is now simply unnecessary for most people's requirements. This was the catalyst for NEC to change the names of its projector lamp work modes coinciding with the launch of its new M Series projector range.

Rather than having the 'Normal' setting being configured for maximum brightness, and then having two progressively dimmer ' ECO ' modes, NEC opted to configure its newest projectors so the 'Normal' mode has the equivalent settings of the previous ' ECO 1' mode, thereby renaming the previous ' ECO 2' mode to just ' ECO ' and the previous 'Normal' setting to be called 'High Bright'.

Hollywood Quality Video

Special image processing technology for better sharpness of movement and reduction of image artefacts and noise with outstanding scaling quality and lossless de-interpolation.

Human Sensor

Desktop Displays:
The human sensor is a smart feature available on most of the NEC desktop monitors which automatically powers the display down and up again subject to the user’s presence. This innovative ECO function is sensitive to the user’s presence and helps significantly to reduce power consumption and carbon output by powering down immediately when not in use. Businesses can realise over 30 % savings* on their operational budget and carbon usage targets by standardising on NEC monitors featuring a Human Sensor.

* Calculation based on UK average electricity rates. Assumes average user is away from their desk for approx. 3 hours throughout the day as identified in a recent NEC ECO survey, based on results from 287 people.

Large Format Displays:
The optional external human sensor detects the presence of a person in front of the screen. The display switches on/off automatically depending on the presence of the user. The sensor can also trigger switching between several active video inputs, change the audio volume or vary the brightness level which can be used to save power.

Intelligent Power Management

Using intelligent power management yields energy cost savings of up to twothirds, as well as reducing emissions and air-conditioning costs.

Interface Extension Slot

This slot offers unique flexibility for additional connections with the choice of adding a single digital or two analogue boards.

IPS Technology

The IPS (In plane switching) panel technology has always found particular favour in the colour-critical display industry (graphic design, pre-press, soft proofing, photo- and video-editing, CAD-CAM), as well as mission-critical multi-screen configurations (medical diagnosis, financial trading rooms). The wide viewing angle with negligible colour shift means that image date is accurately and reliably communicated to all users from all viewing positions. Additionally IPS LCD colour reproduction offers a depth and realism of colour reproduction, in which all nuances can be appreciated.

Keystone Correction

If the image is projected onto the screen at an angle, the display could be distorted. Electronic Keystone Correction compensates for this distortion through calculations made in the projector. If projection at a right-angle is not possible, electronic Keystone Correction provides an effective solution. However, the image quality suffers somewhat as a result of the necessary digital scaling of the image contents.

Lens Shift Function

Enables images to be shifted on the projection surface with no distortion. An innovative feature that provides distortion-free images even in rooms where projector placement is difficult. Presenting without a PC or laptop Running a presentation simply from the NEC projectors – without the need of a PC or laptop. The required data can easily be transfered from a USB stick or PCMCIA card.

MHL (Mobile High Definition Link)

Offers direct video connectivity of the monitor or projector, via HDMI/MHL, with your Smart Phone.

NeCycle

NeCycle, NEC's Revolutionary approach to Bio-Degradable Plastics
NeCycle™, which is the brand name of NEC's newly developed bioplastics, indicates a new style of recycling: a recycling of the material itself as well as a recycling of the CO ₂ that is absorbed by the plant component that constitutes the material's main resource.

Reference

The NEC REFERENCE designation is awarded to our products and solutions which through their performance and benefits are the market benchmark for our customers. The logo is a potent reminder of our high quality, performance-driven Japanese heritage, our focus on award-winning design flair and our passion for benchmark leadership in innovation.

TCO Certified

TCO Certified is the leading independent sustainability certification for IT products. With life cycle criteria for social and environmental responsibility, TCO Certified helps organizations around the world make more sustainable IT choices.

TCO Certified is a Type 1 Ecolabel in accordance with ISO 14024. All certified product models and their manufacturing facilities are independently verified for compliance. 

Top Security

Protection against thieves and unauthorised users. Integrated security functionality utilising passwords, PCMCIA, keyboard lock and personalised start-up logo.

USB Viewer

Allows files to be displayed directly from a USB stick.

VA Technology

The VA (Vertical Alignment) panel technology offers a stable viewing angle, which is appreciated in larger airport terminals. Its stable and robust design makes it more suitable for heavy-duty usage, such as in Public Display or control room applications, where there is more risk for long term static images.

VIDI technology

Lamp technology from Philips for improved colour reproduction, gray scale display and extended colour spectrum.

Viewer PPT converter

NEC software to convert PowerPoint presentations into JPG files, which can then be stored on a USB stick. This enables presentations to be made without a PC directly from a USB stick.

Virtual Remote Function

The Virtual Remote function allows the various projector settings to be managed not only using the remote control unit, but also from the computer connected to it via the VGA cable. These include, for example, the picture and sound settings, or simply switching the projector on and off. Additional cables for the RS232 or USB ports aren’t necessary.

The required software - to enable control of the projector over the network or by using the Virtual Remote function - can be downloaded from NEC Display Solutions free of charge.

You can download the Virtual Remote software here . 

See here how you can easily control your NEC projector or transfer images using your iPad, iPod or iPhone. NEC Projector Controlling and Image Transfer software is available for iOS and allows a total control of projectors on a network.

Wall Colour Correction

Adaption of images to coloured projection surfaces at the press of a button. Thus, images will always be true to colour, no matter what the presentation environment is. Available for many NEC projectors.

Whisper quiet

A special advantage of NEC projectors is their extremely quiet operation. Almost inaudible, they become even quieter - a minimal 25 dB - in the Eco Mode.

White LED Backlight Technology

LED backlighting technology is the modern alternative for rear illumination in LCD monitors.

Wireless LAN Function

Newest technical standards guarantee the highest transmission speeds. Sends presentations through the network from several PCs to one projector, controls several projectors from one PC, or monitors various projectors from one central location.

X-Light ^®

X-Light ^® technology further improves stable and reliable imaging. A predefined and calibrated colour tint is continuously controlled and re-aligned in parallel with the brightness level. Multiple head display systems can be easily matched at the installation site.

X-Light ^TM 3

NEC X-Light ^TM 3 ensures that brightness values and colour settings remain constant and stable over the entire operating lifetime of the display. An RGB 3-color sensor integrated within the front display bezel directly measures the brightness as well as white point, and automatically adjusts the backlighting to the required settings. This means that more exact measurements (i.e. exact setting values) are achieved, since the sensor being situated outside of the LCD module ensures that the measurements correspond exactly to what is being seen by the viewer.

X-Light ^® Pro

The X-Light ^® Pro function ensures that brightness values and colour temperature settings remain stable during the warming up period of the display. Therefore a sensor measures brightness and colour temperature of the backlight and corrects, and stabilises it automatically.