NEC Solutions Zone
Draco OPS+ KVM extender
The Draco OPS/OPS+ KVM extender simplifies the installation, operation and management of remote displays in retail signage, passenger information, medical and other applications.
A single module inserted into a standard OPS+ socket delivers HD and 4K video and digital audio connectivity, with full interactivity. Single wire connection – Cat X or fiber enables remote connection to displays up to 140 m / 10 km from the media source.
For hard-to-access and highly secure installations and for better system management the Draco OPS+ KVM extender delivers the ideal solution.
- High performance AV extension – Lossless video to 4K 60Hz, 4:4:4
- Single wire connection – Up to 140 m – 10 Km (Cat X and fiber)
- Safe, secure - Prevents eavesdropping and unauthorized access
- Flexible, instant switching – Matrix switchable, 8 – 576 ports
- Fully interactive – Instant USB 2.0, USB 3.0 data transfer
- Reliable - Built-in redundancy, hardware back-up
- Enhanced management – Monitoring and control of signage systems
- Ideal for signage applications – Retail, public venues, transport, finance
The Draco OPS+ KVM extender is compatible with every display with an OPS+ slot. Backward compatibility with OPS displays..
Flexible, maintainable and reliable
Allows displays to be located anywhere, with single cable connection and no additional power or network cables..
Maintains full interactivity for single/multi-touch and gesture displays.
Source switching: any source to any display
A KVM matrix switch enables simple connection of any source, of any signal type to any display; ensuring the right content is seen on every screen, whenever it is needed and wherever it is. Through a convenient user control interface or bespoke controller.
Reliability and continuous operation
By centrally locating source computers, system maintenance and up-time is improved. Controlled switching and enhanced monitoring from a central point raises confidence in the operational integrity of the display network.
Security in Operation
KVM extenders greatly enhance security by restricting physical access and preventing electrical intrusion. With controlled access to computers and secured access rights, only authorized personnel can reach sensitive and critical source devices.
At the University of West of Scotland (UWS), a new technology-rich reception area has been created at the entrance to the Paisley campus named as “The Atrium”
The centre-piece of which is a single monolith, digital display wall:
- comprising of 32 off NEC X463UN 46” video wall displays in an 8x4 array
- overall size of the whole combine display is approx. 8.36 x 2.48M
Control is provided by a PIPView BlackBIRD video wall controller:
- managing a digital canvas of 32 displays each @ 1920x1080
- total native resolution of 15,360 x 4,320 available
- input of 16 channels – with 12 of these at 4K with stereo audio
There is a further video wall which is located behind the reception desk, control again is via another PIPView BlackBIRD unit:
- this is in a 3x3 array with the same 46” video wall display units
- total native resolution is 5,760 x 3,240
- with 4 off 4K inputs
For ease of operation, the system uses pre-set layout templates, easily selectable from a touch panel in reception.
With both video walls; to maintain quality across the whole digital canvas from the various input sources, all screens are driven at native HD resolution with the ability to display any input, any size, in any position (PIP picture in picture).
Jim O’Donnell, CIO at UWS commented “the new display area is incredible, it has been a huge hit with our students and staff alike. The technology will allow students to share digital output, bringing to life a key element of our DREAM-BELIEVE-ACHIEVE focus”
Located in Glasgow, Scotland the installation was completed in Spring 2016
The new facility was officially opened by H.R.H. the Princess Royal during a visit to the Campus on 12th February.
ThinkHub is a multi-user software application for collaboration.
It will run on any size touchscreen – in single panel or video wall configuration - and is qualified to work with most major touchscreen technologies.
ThinkHub brings together people, locations, devices, applications, content & ideas into a dynamic and fully interactive multi-touch canvas that is up to 20 times the surface area of the physical display.
It allows users to convene video conferences, present, take notes with the handwritten note feature, and use multi-touch web browsers. It works with the same devices, content and software that you already use.
And it supports device mirroring for laptops, tablets and smart phones across all major platforms including Windows, MacOS, iOS, and Android via the T1V AirConnect™ App
Built with ease of use and customers in mind, ThinkHub allows people to work together more productively, in real time, whether co-located or from wherever in the world they are.
The TeamViewer Host for Raspberry Pi is a system service that allows for the unattended access of Raspberry Pi devices so that they can be maintained, controlled, or managed with theindustry-leading TeamViewer solution, familiar to millions of users around the world.
- Remote Proof of Play on the NEC display
- Remotely adapt device options and see changes in real time
- Transfer Files easily to your displays
- Remote Access from desktop, laptop and mobile
- Easy, Fast, Secure